Draft and refine a personalized travel article from top-ranking articles and your own notes
Have Grok Bot analyze the top-ranking articles, draft a travel article from your own notes and refine it with you on a call, the workflow the author describes.
What the agent did
Source-reported example · as described by Liam Gordon (@liamgordon), runs the travel brand Two Peas Abroad and is building Creator Roam (per his X bio); company size not stated
The author, Liam Gordon, who runs the travel brand Two Peas Abroad, posted on X his "new article workflow": research keyword(s); send Grok Bot a list of the top 10 articles from Google and Bing to analyze what content ranks; give Grok Bot personal references on the topic; Grok Bot generates a draft; he calls Grok Bot (30 minutes to 1 hour) and goes through the draft, live edits and adds personal references; and he gives Grok Bot 10 to 15 personal images to add in.
The post he quotes (his own, 2026-09-19) adds that in a 37-minute call he fully reviewed and refined a 4,000-word article about tours in Vietnam. The post gives no prompt, example article or setup details.
He says this takes an article "from blank doc to highly personalized article in roughly 3-4 hours, down from 1-2 days before" (his own estimate).
In the quoted earlier post he says a 4,000-word article review took one 37-minute call, where he says "Usually this would take me a couple of hours", and that it "barely used 1% of my limits".
Limitations
Short post with no prompt, example or setup details; the times are the author's own estimates and the 1% usage figure comes from a different, earlier post.
It does not say what Grok Bot's analysis of the top 10 articles produced, how the quality or ranking of the finished articles compares, or which parts of the 3 to 4 hours are his own work. He supplies the personal references and photos.
On 2026-09-28 he posted that voice chats had stopped working as before: after an hour going through an article line by line, the bot reported that only a summary of the call was kept and the wording changes were never received, though he could resend the chat transcript to it.
That later post is from the same author, not part of this workflow description. One reply to the workflow post exists and was not readable. The model is not stated.
Try it in your business
What you'll need
Grok Bot; a target keyword and a list of the top-ranking articles for it; your own first-hand notes, references and photos; time to go through the draft with it (he uses a voice call); your own final review before publishing.
The workflow is described as sending Grok Bot lists, references and images and talking through the draft; no connected apps or code are named. The label is our reading, not something the author states.
Starting prompt
The author didn't publish their prompt (read the full note_tweet text of the workflow post, the post it quotes and his other recent posts about articles; no prompt is quoted), so this is our adaptation.
How ours differs from the original setup: Same execution agent (Grok Bot). The author published no prompt, so this is our starting prompt based on his list of steps.
It adds 'check' marks and a no-invented-experiences instruction because the workflow relies on the author's own references, and a no-publish instruction. His voice call and the 10 to 15 photos are not in the prompt; add them in the conversation if you work that way.
I am writing an article for [site] about [topic], targeting [keyword]. Here are the top 10 articles ranking for it: [links]. Analyze what they cover, how they are structured and what they leave out, and summarize that for me. Then, using my own notes and experiences below, [paste notes], draft the article in my voice. Mark anything you added that is not from my notes or the ranking articles as 'check', and do not invent personal experiences. After the draft, I will go through it with you to edit; keep a list of every change we agree on. Do not publish or send anything; give me the draft for my review.
Replace the [bracketed] parts with your own files and tools.
Get examples like this every Tuesday and Friday
Practical ways to put AI agents to work in your business. We check the original sources, explain the setup and point out the limits. Free.
Unsubscribe any time. Privacy policy
Related use cases
Move a blog from Beehiiv to Substack
Have Grok Bot move a blog from Beehiiv to Substack, as the author says he did.
Our suggested starting prompt — not the author's original · untested
You'll need: Grok Bot with access to your Beehiiv and Substack accounts (the post does not say how); your logo file and the text for your About page and welcome email if you want them used; your own review of the Substack site before anything is published; you cancel the old plan yourself.
Move my blog from [Beehiiv publication] to [Substack publication]. First list every post and page on Beehiiv with title, date and URL, and show me the list. Then recreate each post on Substack as a draft, keeping the wording, formatting and links; build a homepage and an About page using [text or the existing About page]; add the logo from [file]; and write a draft welcome email from [text]. Give me a checklist of anything that did not carry over or changed (for example links, embeds and URLs). Do not publish anything and do not cancel, downgrade or delete anything on Beehiiv or anywhere else; I will review the Substack site first.
Onboard a new client end to end: draft the contract, set up their Slack channel and podcast feed, and build website mockups for your review
Have Claude run a client-onboarding skill that drafts the client's contract, creates their shared Slack channel, adds them to your client database, and prepares samples, website mockups and a podcast feed for your review, while you send the invites, grant access and write the client messages yourself.
Our suggested starting prompt — not the author's original · untested
You'll need: Claude with skills (or saved instructions) describing your onboarding process; your internal docs, past contracts and the client's correspondence; access to your documents (for example Google Drive and Docs) and, if you let it do setup steps, to your team chat (the author used Slack via Claude's browser use) and client database; your own review of the contract, every account, channel or access change, and every client message. Building the skills was a one-off investment of about a day of the author's time, by his estimate.
Help me onboard a new client for my [type of service] business. Work in stages and stop for my approval at the end of each one. Stage 0 (first time only): Read my internal docs and past client notes in [folder]. Write a short overview of what my business does and how it works, then draft a step-by-step client onboarding checklist. I'll correct it. Once I approve it, save it as reusable instructions I can run for future clients. Stage 1, contract: Using the client emails and call notes I've attached and my past contracts in [folder], draft a service contract for [client] as a document. Look up their public details (legal name, registered address, registration number) and list where you found each one. Highlight anything that differs from my usual contract or that you're unsure about. Don't send it or upload it to a signing service. I'll review it and send it myself. Stage 2, setup: List every channel, record and account this client needs (for example a shared [Slack] channel that follows my naming pattern, or an entry in my client database), and wait for my OK before you create each one. Don't invite the client, grant access, change permissions, or enter any password or payment details. Give me the invite link or the exact page to open, and I'll do those steps. Stage 3, tailoring and samples: Review [the client's website or materials], list the special cases my service needs to handle for them, and propose a rule for each. After I approve the rules, prepare [sample deliverables] for me to check, and flag anything you're unsure about. Stage 4, mockups and delivery setup: Make mockups of [how my deliverable would look on their website], using their public branding, and draft [the feed, page or other delivery setup] privately. Don't publish anything until I approve it. Stage 5, client update: Don't write or send messages to the client. Give me a bullet list of points to cover in my update, then check my draft for clarity and for anything I've missed. Finish with a checklist of what's done, what's waiting for my approval, and what I need to do myself.
Check local prospects' email security and draft personalized outreach for your approval
Have Grok Bot research local businesses' public email-security records and draft personalized first-touch emails for your approval, the work the author says his AI team did.
Our suggested starting prompt — not the author's original · untested
You'll need: Grok Bot, or a Grok Bot team set up with roles like the author's; a list of the businesses to research (the post does not say whether the team found them or he supplied them); somewhere to keep the drafts and findings; your own approval of every email before anything is sent.
Here is a list of local businesses: [name, website, contact]. For each one, read only the DNS records the domain already publishes publicly and note whether it has SPF, DMARC and DKIM records and anything that looks missing or misconfigured. If you cannot tell (for example DKIM may depend on a selector you cannot see), write 'unknown' instead of guessing. Do not probe, scan or log in to anything. Then draft a short first-touch email to the owner, in plain English and in my tone, that names what you found for their domain and offers [my free check or service]. Put the findings in a table (business, domain, what you found, how sure you are) and save each draft with it. Do not send any email or contact anyone; give me the table and the drafts for my review and approval.

